Programming and Relearning

Registration for Immobilizer System

1. Have all registered keys and the PCM code.

2. Connect the HDS to the data link connector (DLC).

3. Turn the ignition switch to ON (II).

4. Select IMMOBI from the SYSTEM SELECTION MENU, then select the IMMOBILIZER SETUP.

5. Select REPLACE IMMOBILIZER/KEYLESS CONTROL UNIT REPLACE.

6. Do the registration according to the instructions on the HDS screen.

7. Check that the engine can be started with all registered keys.

8. When prompted by the HDS, do the keyless transmitter programming.