| Engine does not crank |
- Check for loose battery terminals or connections.
- Test the 12 volt battery for a low state of charge (see
12 VOLT BATTERY TEST
).
- Check for PGM-FI DTCs (see
GENERAL TROUBLESHOOTING INFORMATION
).
- Check the starter (see STARTER SYSTEM CIRCUIT TROUBLESHOOTING ).
- Check the starter cut relay (see
POWER RELAY TEST
).
- Check the starter system circuit troubleshooting (see STARTER SYSTEM CIRCUIT TROUBLESHOOTING ).
- Check the transmission range switch (see
TRANSMISSION RANGE SWITCH TEST
).
- Check the ignition switch or related circuits (see
PARK PIN SWITCH TEST
).
|
- Poor ground at G101
- Seized engine
|
| Engine cranks, but does not start |
- Check for PGM-FI DTCs (see
GENERAL TROUBLESHOOTING INFORMATION
).
- Check for IMMOBI status and function (see
SYMPTOM TROUBLESHOOTING INDEX
).
- Check the fuel pressure (see
FUEL PRESSURE TEST
).
- Check for a plugged or damaged fuel line (see
FUEL LINE INSPECTION
).
- Check for a plugged fuel filter (see
FUEL PRESSURE REGULATOR REPLACEMENT
).
- Check the throttle body (see
THROTTLE BODY TEST
).
- Check for low engine compression (see
ENGINE COMPRESSION INSPECTION
).
- Check the camshaft timing (see
CAM CHAIN REMOVAL
).
- Do the PCM reset in the PGM-FI INSPECTION menu to cancel ALL INJECTORS STOP with the HDS.
|
- Fuel level in tank
- Weak or fouled spark plugs
|
| Engine is hard to start |
- Check for PGM-FI DTCs (see
GENERAL TROUBLESHOOTING INFORMATION
).
- Check the fuel pressure (see
FUEL PRESSURE TEST
).
- Check for a plugged or damaged fuel line (see
FUEL LINE INSPECTION
).
- Check for a plugged fuel filter (see
FUEL PRESSURE REGULATOR REPLACEMENT
).
|
Weak or fouled spark plugs |
| Engine cranks slowly |
- Check for loose battery terminals or connections.
- Test the 12 volt battery for a low state of charge (see
12 VOLT BATTERY TEST
).
- Check the starter for binding (see STARTER SYSTEM CIRCUIT TROUBLESHOOTING ).
- Check for excessive drag in the engine.
- Check for excessive drag in the transmission.
|
|