Oil Filter Feed Pipe Replacement

Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT ).
Remove the oil filter feed pipe.

Fig 1: Identifying Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold one nut with a wrench, then tighten the other nut.

Fig 2: Identifying Nuts On Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Torque the oil filter feed pipe to 39 N.m (4.0 kgf.m, 29 lbf.ft), then remove the nuts from the oil filter feed pipe.
Install the oil filter (see ENGINE OIL FILTER REPLACEMENT ).