System Description: Overview
The navigation system is a highly sophisticated, hybrid locating system.
The audio-navigation unit uses global positioning system (GPS) satellite signals, internal yaw and vehicle speed inputs, and a map database to show where the vehicle is and to help guide you to a desired destination.
The navigation unit's GPS receiver receives signals from the GPS, a network of 24 satellites in orbit around the earth. By receiving signals from several of these satellites, the navigation system can determine the latitude, longitude, and elevation of the vehicle.
Signals from the system's yaw rate sensor (inside the navigation unit) detects turns, and the PCM vehicle speed pulse (VSP) and reverse signal enable the system to keep track of the vehicle's speed and direction of travel. The advantage of this hybrid system is that the system can track your position if either the GPS signal or the vehicle speed signal is missing. For instance, when in a tunnel (no GPS), the speed signal is used to update your position on the map. Alternately, while the vehicle is being transported on a ferry, GPS signals can show the vehicle position on the map as it crosses the water.
The navigation system uses the location, direction, and speed information to display the appropriate map and calculate a route to the destination entered. As you drive to a destination, the system provides both visual and audio guidance. Audio guidance is sent to the audio unit, and an RGB graphics color signal is sent to the navigation display.
This navigation system also has voice recognition that allows voice control of most of the navigation, and audio functions. The voice control switches (navigation TALK and BACK buttons on the steering wheel) activate the voice control system. The microphone on the ceiling receives your voice commands. For more information on this feature, consult the navigation owner's guide.
The illumination signal is used by the navigation unit to automatically switch the display mode between the Night and Day display modes. When the headlights are on, and the dash brightness control setting is set to full bright, it overrides the Night display mode, and allows a daytime navigation display with the lights on.
When the navigation system is giving voice guidance commands, the front speakers are muted. When the voice control system is being used (navigation TALK button pressed), all of the speakers are muted.
The internal GA-Net II bus passes information back and forth between the navigation display, the audio-navigation unit, the USB adapter, and the audio system components. The information passed on this bus are touch button commands, audio muting signal, audio (radio and USB adapter), and any opens or shorts in these bus lines can affect the navigation system or other audio accessory operation.
The clock on the navigation display is set and maintained internally by the navigation unit. The time is automatically adjusted for daylight savings, and time zone changes while driving. The time and daylight savings time can be adjusted in setup.
Additional information is available about the navigation components following the System Diagram. A glossary of terms that are used throughout this section follows the detailed information.
The Navigation System Manual in the glove box or on-line at any official Honda service website covers all of the system functions and settings. Use this as a resource when evaluating a customer concern.
The Comm. Bus connects the HandsFreeLink control unit to the audio-navigation unit. If a POI phone number is available, the navigation unit can send the phone number to the HandsFreeLink control unit for dialing if a phone is paired.