FTP Sensor Replacement

Raise the vehicle on a lift.
Disconnect the hoses from the EVAP canister filter. (see EVAP CANISTER FILTER REPLACEMENT )
Remove the bolts (A), then remove the canister guard (B).

Fig 1: Canister Guard And Mounting Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hose (A) and the FTP sensor 3P connector (B).

Fig 2: Identifying FTP Sensor 3P Connector, Hose, Retainer And O-Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the retainer (C), then remove the FTP sensor (D).
Install the parts in the reverse order of removal with a new O-ring (E) and a new retainer.