DTC P0602: PCM Programming Error
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- This DTC is indicated when a PCM update is not completed.
- Do not turn the ignition switch to LOCK (0) or ACC (I) while updating the PCM. If you do, the PCM can be damaged.
- Do the PCM update procedure (see PCM UPDATE ).
- Check for Pending DTCs or Confirmed DTCs with the HDS.
Is DTC P0602 indicated?
YES -Replace the original PCM (see PCM REPLACEMENT ). ■
NO -The troubleshooting is complete. ■