LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> Insight Base >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System Components >> VSA Modulator-Control Unit Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSA Modulator-Control Unit Removal and Installation: Installation

  1. Install the VSA modulator-control unit onto the bracket.
  2. Install the bracket with the VSA modulator-control unit to the body.
  3. Reconnect the six brake lines, then tighten the flare nuts to the specified torque.
  4. Align the connecting surface of the VSA modulator-control unit 47P connector to the VSA modulator-control unit.
  5. Pull up the lever of the VSA modulator-control unit 47P connector, then confirm the connector is fully seated.
  6. Bleed the brake system (see BRAKE SYSTEM BLEEDING ).
  7. Do the VSA modulator-control unit update (see VSA MODULATOR-CONTROL UNIT UPDATE ).
  8. Do the VSA sensor neutral position memorization procedure (see VSA SENSOR NEUTRAL POSITION MEMORIZATION ).
scientia non olet · About LEMON Manuals