Torque Specifications: Driveline/Axle

Location	Item	Remark	Torque
Driveline/axle	Front drive shaft spindle nut (26 mm)	Use oil on the seating surface Use new nut	328 N.m (33.4 kgf.m, 242 lbf.ft)
	Rear drive shaft spindle nut (24 mm)	Use oil on the seating surface Use new nut	245 N.m (25.0 kgf.m, 181 lbf.ft)
	Driveshaft bearing bracket bolts		30 N.m (3.1 kgf.m, 22 lbf.ft)
	Driveshaft support base bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Heat shield bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	No. 1 propeller shaft bolts	Use new bolts	72 N.m (7.3 kgf.m, 53 lbf.ft)
	No. 2 propeller shaft bolts	Use new bolts	72 N.m (7.3 kgf.m, 53 lbf.ft)
	Propeller shaft protector bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Center support bearing bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)

NOTE:

Refer to the each appropriate section for the precautions and complete procedures.
Refer to the each appropriate section for the bolts/nuts not indicated here.