LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Pilot EX, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Design, Body And Torque Service Specifications >> Torque Summary >> Torque Specifications >> Engine Mechanical
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mechanical

Location Item Remark Torque
Engine assembly Front engine mount bracket bolts Use new bolts 38 N.m (3.9 kgf.m, 28 lbf.ft)
Front engine mount bolt (10 mm) Qty1 Use new bolt 54 N.m (5.5 kgf.m, 40 lbf.ft)
Front engine mount bolts (10 mm) Qty4 Use new bolts 38 N.m (3.9 kgf.m, 28 lbf.ft)
Front engine mount stop nuts Use new nuts 74 N.m (7.5 kgf.m, 54 lbf.ft)
Lower transmission mount bolt (10 mm) Qty 1 Use new bolt 54 N.m (5.5 kgf.m, 40 lbf.ft)
Lower transmission mount bolts (10 mm) Qty3   38 N.m (3.9 kgf.m, 28 lbf.ft)
Power steering pump bracket bolts   22 N.m (2.2 kgf.m, 16 lbf.ft)
Rear engine mount bracket bolts Use new bolts 88 N.m (9.0 kgf.m, 65 lbf.ft)
Rear engine mount bolt (10 mm) Qty 1 Use new bolt 54 N.m (5.5 kgf.m, 40 lbf.ft)
Rear engine mount bolts (10 mm) Qty 4 Use new bolts 38 N.m (3.9 kgf.m, 28 lbf.ft)
Rear engine mount base bolts (10 mm) Qty2 (front side) Use new bolts 42 N.m (4.3 kgf.m, 31 lbf.ft)
Rear engine mount base bolts (10 mm) Qty2 (rear side)   42 N.m (4.3 kgf.m, 31 lbf.ft)
Rear engine mount stop nuts Use new nuts 74 N.m (7.5 kgf.m, 54 lbf.ft)
Side engine mount bracket bolts (10 mm) Qty3 Use new bolts 44 N.m (4.5 kgf.m, 33 lbf.ft)
Side engine mount bracket bolts (10 mm) Qty2(2) Use new bolts 44 N.m (4.5 kgf.m, 33 lbf.ft)
Side engine mount bolt (12 mm) Qty1(2) Use new bolt 54 N.m (5.5 kgf.m, 40 lbf.ft)
Side engine mount bolts (12 mm) Qty3   54 N.m (5.5 kgf.m, 40 lbf.ft)
Engine block Rocker arm oil control solenoid/oil filter assembly bolts   22 N.m (2.2 kgf.m, 16 lbf.ft)
Engine lubrication Oil filter   12 N.m (1.2 kgf.m, 9 lbf.ft)
Oil filter feed pipe Use oil on threads 35 N.m (3.6 kgf.m, 26 lbf.ft)
Oil pan drain bolt Use new washer 40 N.m (4.1 kgf.m, 30 lbf.ft)
Oil pressure switch Use new O-ring - Use liquid gasket on threads 22 N.m (2.2 kgf.m, 16 lbf.ft)
Intake manifold and exhaust system Intake manifold bolts(1)   22 N.m (2.2 kgf.m, 16 lbf.ft)
Intake manifold nuts(1)   22 N.m (2.2 kgf.m, 16 lbf.ft)
Injector base bolts(1)   22 N.m (2.2 kgf.m, 16 lbf.ft)
Injector base nuts(1)   22 N.m (2.2 kgf.m, 16 lbf.ft)
Exhaust pipe A self-locking nuts (Warm up TWC side)(2) Use new nuts 54 N.m (5.5 kgf.m, 40 lbf.ft)
Exhaust pipe A self-locking nuts (Under-floor TWC side)(2) Use new nuts 33 N.m (3.4 kgf.m, 25 lbf.ft)
Exhaust pipe B self-locking nuts(2) Use new nuts 33 N.m (3.4 kgf.m, 25 lbf.ft)
(1) Parts to be tightened in particular orders.
(2) Follow the appropriate procedure procedures in each section closely for torque, sequence, and special steps.
NOTE:
  • Refer to the each appropriate section for the precautions and complete procedures.
  • Refer to the each appropriate section for the bolts/nuts not indicated here.
scientia non olet · About LEMON Manuals