Power Window Master Switch Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Carefully remove the power window switch panel (A).

Fig 1: Identifying Power Window Switch Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 37P connector (B) from the power window master switch, and the 13P connector (C) from the power mirror switch.
Remove the four screws and the power window master switch (A).

Fig 2: Identifying Power Window Master Switch & Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the switch in the reverse order of removal.
RESETTING THE POWER WINDOW CONTROL UNIT .