| Elapsed time after monitor finishing condition except immediate starting the engine |
1.0 second |
- |
| Elapsed time of reversion to pausing cylinders monitor |
1.0 second |
- |
| Engine coolant temperature |
None, unless the initial engine coolant temperature is 14 °F (-10 °C) or less, in which case the monitor will not run until the engine coolant temperature reaches 68 °F (20 °C) |
| Engine speed |
500 rpm |
6, 300 rpm |
| MAP value |
400 rpm |
24 kPa (7.1 inHg, 180 mmHg) |
- |
| 1, 750 rpm |
19 kPa (5.6 inHg, 142 mmHg) |
- |
| Fuel feedback |
Other than during fuel cut-off operation |
| No active DTCs set (prevents monitor from running) |
P0107, P0108, P0117, P0118, P0122, P0123, P0222, P0223, P0335, P0339, P1128, P1129, P2227, P2228, P2229 |
| No active DTCs set (prevents monitor from running) |
P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0134, P0135, P0222, P0223, P0335, P0339, P1109, P1128, P1129, P1172, P2195, P2227, P2228, P2229, P2237, P2238, P2243, P2245, P2251, P2252 |
| Other |
Test-drive on a flat road to avoid misdetection |