LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Intake Air System >> Air Cleaner Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Cleaner Removal/Installation

  1. Disconnect the MAF sensor/IAT sensor connector (A).
    Fig 1: Air Cleaner Replacement Components With Torque Specifications
    G08079446Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the harness clamps (B) and the bolts (C).
  3. Loosen the band (D), then remove the air cleaner (E).
  4. Install the parts in the reverse order of removal.
    NOTE: When tightening the screw of the hose band (F), align the edge of the hose band (G) between the marks (H) painted on the hose band.
scientia non olet · About LEMON Manuals