LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ELD Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ELD Replacement

  1. Remove the under-hood fuse/relay box (see REMOVAL AND INSTALLATION ).
  2. Remove the screws (A), and the fuse (B).
    Fig 1: Identifying Fuse And Screws
    G08079217Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Turn the housing over, then remove the screw (A).
    Fig 2: Identifying Screw
    G08079218Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Turn the housing over again. Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box housing (C).
    NOTE: Make sure the terminals (D) are not bent or damaged.
    Fig 3: Identifying Fuse/Relay Box Base, Housing, Tabs And Terminals
    G08079219Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the ELD (A).
    Fig 4: Identifying ELD
    G08079220Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the parts in the reverse order of removal.