Memorizing a Seat and Mirror Position
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
Move the seat and the mirrors to the desired position. Turn the ignition switch to ON (II).
Press and release the SET button on the driver's position memory switch. A single beep will be heard and both of the green LEDs will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat and mirror positions have been memorized. The green LED will remain lit, unless the seat and the mirrors are moved from the memorized position.