Operating Condition

Courtesy of HONDA, U.S.A., INC.

Enter the maintenance mode, then start the engine. Hold the engine speed [Engine Speed] at 3000 RPM without load (in P or N) until the radiator fan comes on.
Drive the vehicle in engine speed [Engine Speed] 1000 - 1200 RPM.
Take 10 - 15 seconds to accelerate up to engine speed [Engine Speed] 4000 RPM.
When the diagnosis does not finish, repeat driving pattern steps 2 through 3, five times.

Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.