Possible Cause
NOTE:
The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
- Park pawl actuator driver unit RA/P-ACT RA line open
- Park pawl actuator driver unit RB/P-ACT RB line open
- Park pawl actuator driver unit VENC/P-ACT VENC line open
- Park pawl actuator driver unit EENC/P-ACT EENC line open
- Park pawl actuator driver unit RA/P-ACT RA line short to ground
- Park pawl actuator driver unit RB/P-ACT RB line short to ground
- Park pawl actuator driver unit VENC/P-ACT VENC line short to ground
- Park pawl actuator driver unit EENC/P-ACT EENC line short to ground
- Park pawl actuator driver unit RA/P-ACT RA line short to power
- Park pawl actuator driver unit RB/P-ACT RB line short to power
- Park pawl actuator driver unit EENC/P-ACT EENC line short to power
- Park pawl actuator power supply line abnormal (include fuse blown)
- Park pawl actuator driver unit GND line open
- Park pawl actuator driver unit power supply line abnormal (include fuse blown)
- 12 volt battery abnormal
- Park pawl actuator driver unit internal circuit failure