Possible Cause
NOTE:
The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
- Park pawl actuator driver unit MAU/P-ACT MTR U line open (includes a loose or disconnected connector)
- Park pawl actuator driver unit MAV/P-ACT MTR V line open (includes a loose or disconnected connector)
- Park pawl actuator driver unit MAW/P-ACT MTR W line open (includes a loose or disconnected connector)
- Park pawl actuator relay P-ACT RLY CL- line open (includes a loose or disconnected connector)
- Line between the park pawl actuator and the park pawl actuator relay open
- Park pawl actuator relay power supply line open
- Park pawl actuator driver unit MAU/P-ACT MTR U line short to ground
- Park pawl actuator driver unit MAV/P-ACT MTR V line short to ground
- Park pawl actuator driver unit MAW/P-ACT MTR W line short to ground
- Park pawl actuator relay stuck off
- Park pawl actuator driver unit internal circuit failure