DTC P0630
DTC P0630 : VIN Not Programmed or Mismatch
- Before you troubleshoot, review the general troubleshooting information .
- This DTC is stored only when the PCM does not have the VIN information of the vehicle. Use the HDS to input the missing VIN information.
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P0630 VIN Not Programmed or Mismatch |
DTC (PGM-FI)
- VIN check
-1. Turn the vehicle to the ON mode.
-2. Check the VIN with the HDS.
Does the HDS show the vehicle's VIN?
YES
Go to step 4.
NO
Go to step 2.
- VIN check (rewrite)
-1. Input the correct VIN to the PCM with the HDS.
Does the HDS show COMPLETE?
YES
Go to step 4.
NO
Go to step 3.
- DTC check
-1. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P062F PCM Internal Control Module Keep Alive Memory (KAM) Error DTC (PGM-FI)
Is DTC P062F indicated?
YES
Go to the troubleshooting for DTC P062F .
NO
Go to step 4.
- PCM check
-1. Clear the DTC with the HDS.
-2. Turn the vehicle to the OFF (LOCK) mode.
-3. Turn the vehicle to the ON mode, and wait for 5 seconds.
-4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P0630 VIN Not Programmed or Mismatch DTC (PGM-FI)
Is DTC P0630 indicated?
YES
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM , then recheck. If DTC P0630 goes away and the PCM was substituted, replace the original PCM .
NO
Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTCs troubleshooting.