DTC P100B
DTC P100B : Electric VTC Motor Control Module Malfunction
NOTE:
Before you troubleshoot, review the general troubleshooting information
.
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P100B Electric VTC Motor Control Module Malfunction |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode, and wait for 5 seconds or more.
-5. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P100B Electric VTC Motor Control Module Malfunction DTC (PGM-FI)
Is DTC P100B indicated?
YES
The failure is duplicated. Replace the electric VTC motor .
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the electric VTC motor and the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .