DTC P2229
DTC P2229 : BARO Sensor Circuit High Voltage
NOTE:
Before you troubleshoot, review the general troubleshooting information
.
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P2229 BARO Sensor Circuit High Voltage |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Check the parameter(s) below with the HDS.
Signal Threshold Current conditions Values Unit Values Unit Baro Sensor More than 855.1 mmHg Data List
Do the current condition(s) match the threshold?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM , then recheck. If DTC P2229 goes away and the PCM was substituted, replace the original PCM .
NO
Intermittent failure, the system is OK at this time. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .