DTC B1077

DTC B1077  : Front Wiper Auto Stop Switch Signal Error

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Body Control Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B1077 Front wiper auto stop switch signal error

   Is DTC B1077 indicated?

   YES 

   Replace the windshield wiper control unit/motor .

   NO 

   Intermittent failure, the system is OK at this time.