DTC P2227
DTC P2227 : BARO Sensor Circuit Out of Range
NOTE: Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P2227 BARO Sensor Circuit Out of Range |
DTC (PGM-FI)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P2227 BARO Sensor Circuit Out of Range Is DTC P2227 indicated?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good PCM - Refer to:
PCM Removal and Installation (19-21 9-Speed A/T), or PCM Removal and Installation (6-Speed A/T, 16-18 9-Speed A/T) .
NO
Intermittent failure, the system is OK at this time.
If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot - Refer to: How to Troubleshoot the Fuel and Emissions Systems .