DTC P16FC
DTC P16FC : PCM Internal Circuit Malfunction (Starter Control)
NOTE: Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P16FC PCM Internal Circuit Malfunction (Starter Control) |
DTC (PGM-FI)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Start the engine.
- 4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P16FC PCM Internal Circuit Malfunction (Starter Control) DTC (PGM-FI)
Is DTC P16FC indicated?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good PCM - Refer to:
PCM Removal and Installation (6-Speed A/T, 16-18 9-Speed A/T), or PCM Removal and Installation (19-21 9-Speed A/T) .
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the PCM.
If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot - Refer to: How to Troubleshoot the Fuel and Emissions Systems .