Removal Procedure

Under normal use, the battery in the transmitter will last about 2 years, form battery replacement, use a Panasonic 3 volt, type CR2032, or the equivalent.

1. In order to open the transmitter case, perform the following steps:
   1. Insert a dime between the two halves of the transmitter near the key ring hole.
   Fig 1: Opening Transmitter Case
   Courtesy of GENERAL MOTORS CORP.
   2. Twist the dime.
Fig 2: View Of Transmitter Battery
Courtesy of GENERAL MOTORS CORP.
2. Remove the battery.