LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Adjuster Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the memory module, if equipped. Refer to Memory Seat Control Module Replacement .
    2. Fig 1: View Of Seat Belt Buckle, Nut & Electrical Connection
    GM381486Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the inboard seat belt buckle and nut (1).

    Tighten:  Tighten the nut to 53 N.m (39 lb ft).

  3. Connect the electrical connection (2).
  4. Install the seat adjuster track cover. Refer to Seat Adjuster Track Cover Replacement - Front .
  5. Install the seat back hinge/recliner mechanism. Refer to Seat Back Hinge/Recliner Mechanism Replace - Front .
  6. Install the seat back frame to the seat adjuster. Refer to Seat Back Frame Replacement - Front .
  7. Install the seat cushion frame to the seat adjuster. Refer to Seat Cushion Frame Replacement - Front .
  8. Install the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  9. Install the seat in the vehicle. Refer to Seat Replacement - Front Bucket .
  10. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals