LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Windows >> Repair Instructions >> Rear Lift Window Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
    IMPORTANT: Before cutting out a window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  1. Remove the window garnish molding from the door frame.
    2. Fig 1: Disconnecting/Reconnecting Rear Window Defogger Electrical Connector
    GM379401Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
  2. Disconnect the electrical connector from the window defogger on the window, if equipped.
    3. Fig 2: Separating Urethane Adhesive From Window
    GM315335Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Keep the cutting edge of the tool against the glass.
  3. This will allow the urethane adhesive to be separated from the glass.
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    • Use J 24402-A  . See Special Tools .J 39032  or equivalent in order to remove the liftgate window. See Special Tools .
    4. Fig 3: Identifying Rear Lift Window
    GM870674Courtesy of GENERAL MOTORS CORP.
  4. With the aid of an assistant, remove the window from the opening.
scientia non olet · About LEMON Manuals