Test C: Charge Indicator Inoperative
- If diagnostic system check was not performed, perform ENGINE ELECTRICAL DIAGNOSTIC SYSTEM CHECK under ON-VEHICLE TESTING. If diagnostic system check was performed, go to next step.
- Turn ignition switch to RUN position. If charge indicator light does not illuminate, go to next step. If charge indicator light illuminates, problem is intermittent. Check wiring and connections.
- Replace charge indicator bulb. See appropriate ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. After repair, go to next step.
- Operate system to verify repair. If system is not operating correctly, repeat test beginning at step 2 .