LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Computer Relearn Procedures) >> Engine Control Module Or Powertrain Control Module >> Service Programming System Remote Procedure (Corvette) >> Programming Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Verification

WARNING: This page does not describe the selected car, but rather 60 other vehicles, including the 2003 Saturn Vue, 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a scan tool, clear the DTCs.
  2. Attempt to start the engine.
  3. Repeat the Service Programming procedure if the engine does not start or operates poorly. Perform the following procedures before programming the PCM:
    • Ensure the control module and DLC connections are okay.
    • Ensure the Techline operating software is up to date.
    • Ensure the calibration part number is correct for the vehicle.
  4. Attempt to program the control module. If the control module still cannot be programmed properly, replace the control module. See REMOVAL & INSTALLATION - CORVETTE article. You must program the replacement control module.
scientia non olet · About LEMON Manuals