LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Body Control System) >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> Programming the BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the BCM

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: After the procedure is completed, the personalization settings of the BCM are set to a default setting. Inform the customer that the personalization must be set again.

Perform the BCM special function "Request BCM Info. for SPS", then connect the scan tool to SPS terminal. Refer to Service Programming System (SPS) in Programming.

scientia non olet · About LEMON Manuals