LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Body Control System) >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Body Control Module
    GM832814Courtesy of GENERAL MOTORS CORP.
  1. Install the body control module (1) into the bracket.
  2. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gauges and Console.
  3. Connect the battery negative cables. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) in Engine Electrical.
  4. Setup the body control modules customized options. Refer toBody Control Module (BCM) Programming/RPO Configuration .
scientia non olet · About LEMON Manuals