Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Shift Lock Actuator & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices

Install the Shift Lock Actuator onto the shift selector and install fasteners (2).
Tighten: Tighten the shift lock actuator fasteners to 2 N.m (18 lb in).
Connect the electrical connector (3).

Fig 2: Removing & Installing Console

Courtesy of GENERAL MOTORS CORP.

Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.