Problem Diagnosis
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Intermittent problem diagnosis requires duplication of circuit or component failure to identify problem. See TEST PROCEDURES . These procedures may lead to an integration module recording a DTC, which may help diagnosis.
If system does not set a DTC, use scan tool or DVOM to monitor voltage or resistance values while attempting to reproduce conditions which will create an intermittent problem.
When monitoring voltage, ensure specified test conditions are met. When monitoring resistance, ensure ignition switch is in LOCK position or negative battery cable is disconnected. A status change on scan tool or DVOM while performing test procedures indicates area of problem.