Method 2-Scan Tool Required, Program Individual Transmitter
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Only use this option if you are certain which transmitter #1-#4 is being replaced, or the new transmitter can be programmed into a previously unused position within the PDM memory. Refer to IMPORTANT above.
- Install a scan tool.
- Turn the ignition ON, with the engine OFF.
- Use the scan tool in order to access the passenger door module Special Function menu.
- Select "Program Individual Key Fob" to program a specific transmitters.
- Follow the directions on the scan tool in order to program the transmitter or transmitters.
- Operate the transmitter functions in order to verify correct system operation.