LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Shift Interlock Systems) >> Removal & Installation >> Console Trim Plate >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Console Trim Plate: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Do not allow the sharp edges of the trim to come in contact with the soft vinyl trim on the console.
  1. Ensure the protective tape is still in place. Position the trim plate to the console. Connect the electrical connectors.
  2. Engage the retainer clips as follows:
    1. Use one hand to carefully push the left hand side of the console away from the trim plate.
    2. Use the other hand to grasp the left hand side of the trim plate through the chrome ring.
    3. Align the retainer clips on the left side of the trim plate to the openings in the console.
    4. Repeat steps A-C for the right side.
  3. Apply even downward pressure on the trim plate (2) to engage the retaining clips. DO NOT use force.
  4. Install the screws (1). Tighten the screws to 18 INCH lbs. (2 N.m). Install the center instrument panel trim plate. See CENTER INSTRUMENT PANEL TRIM  .
  5. Remove the protective tape. Install the gearshift lever knob. Shift the vehicle into Park. Remove the blocks from the wheels. Disengage the parking brake.
scientia non olet · About LEMON Manuals