April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Specifications

SERVICE SPECIFICATIONS

Applications

In. (mm)

Front Brakes⁽¹⁾

Rotor Discard Thickness

1.437 (36.50)

Rotor Minimum Allowable Thickness (After Refinish)

1.457 (37.0)

Rotor Thickness (NEW)

1.496 (38.0)

Rotor Maximum Allowable Assembled Lateral Runout

0.005 (0.13)

Rotor Maximum Allowable Scoring

0.059 (1.50)

Rotor Maximum Allowable Thickness (Variation)

0.001 (0.02)

Rear Brakes⁽¹⁾

Rotor Discard Thickness

1.083 (27.5)

Rotor Minimum Allowable Thickness (After Refinish)

1.102 (28.0)

Rotor Thickness (NEW)

1.142 (29.0)

Rotor Maximum Allowable Assembled Lateral Runout

0.005 (0.13)

Rotor Maximum Allowable Scoring

0.059 (1.50)

Rotor Maximum Allowable Thickness (Variation)

0.001 (0.025)

⁽¹⁾	All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.