LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Adjustments >> Front Toe Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Toe Adjustment

  1. Loosen the jam nut on the tie rod.
  2. Rotate the inner tie rod to the required toe specification setting. See WHEEL ALIGNMENT SPECIFICATIONS  .
    NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  3. Tighten the jam nut on the tie rod. See TORQUE SPECIFICATIONS  .
  4. Check the toe setting after tightening.
  5. Readjust the toe setting if necessary.
scientia non olet · About LEMON Manuals