Removal Procedure

Fig 1: Center Console Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the console. Refer to Console Replacement in Instrument Panel, Gages and Console.

Fig 2: Shift Lock Actuator & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 3: Removing/Installing Shift Lock Actuator

Courtesy of GENERAL MOTORS CORP.

Shift assembly to LOW position.
Loosen and remove the screw at the rear of the shiftier assembly.
Shift the assembly to the NEUTRAL position.
Loosen and remove the top screw of the shift lock actuator through the lever slot.
Pull lever to the DRIVE position and remove the shift lock actuator.