Power Window System Controls

The power window system will operate anytime the retained accessory power (RAP) system is active or when the ignition switch is in the ACCY or ON position.

The driver door module (DDM) contains 4 power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the 2 front windows have 3 positions up, down, and express down, while the switches for the rear windows have only 2 positions, up and down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a Class 2 message indicating the switch and it's changed position.

The passenger door module (PDM) contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has 2 positions up and down. Each of these switch positions is a direct input to the PDM.

The 2 rear passenger doors have their own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the body control module (BCM), upon receiving a Class 2 message from the DDM, can control the set of relays which will activate the rear window motors.