Removal Procedure

IMPORTANT: Perform the CKP System Variation Learn Procedure when the crankshaft position sensor is removed or replaced.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

Fig 1: View Of Starter

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the starter. Refer to Starter Motor Replacement in Engine Electrical.

Fig 2: Identifying Crankshaft Position (CKP) Sensor/Connector

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of CKP Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
Remove the CKP sensor retaining bolt.
Remove the CKP sensor.