LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2005 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Filler Hose Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Fill Hose & Hose Clamps
    GM832912Courtesy of GENERAL MOTORS CORP.
  1. Uncap the fuel tank opening.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel fill hose and the hose clamps to the fuel fill pipe.

    Tighten:  Tighten the hose clamps to 2.5 N.m (22 lb in).

  3. Lower the vehicle.
  4. Refill the fuel system.
scientia non olet · About LEMON Manuals