Installation Procedure
- Place the check link in position in the door.
- Install the nuts (2) that retain the check link to the door.
Tighten: Tighten the nuts to 9 N.m (7 lb ft).
- Replace the rubber grommet in the door check link opening (1).
- Install the fasteners (1) that retain the check link to the vehicle.
Tighten: Tighten the fasteners to 9 N.m (7 lb ft).
- Install the water deflector. Refer to Front Side Door Water Deflector Replacement or Rear Side Door Water Deflector Replacement .
- Install door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.