LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the hoses from the steering gear.
  2. Disconnect the intermediate shaft from the steering gear. Refer to Lower Intermediate Steering Shaft Replacement in Steering Wheel and Column.
    3. Fig 1: Power Steering Gear
    GM793263Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.
  3. Raise the vehicle. Support the vehicle with suitable safety stands.
  4. Remove the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and Underbody.
  5. Remove the pitman arm from the steering gear. Refer to Pitman Arm Replacement in Steering Linkage.
  6. Remove the bolts retaining the steering gear to the frame.
  7. Remove the steering gear from the vehicle.
scientia non olet · About LEMON Manuals