Scan Tool Data Definitions
- All Door Unlock Relay
-
The scan tool displays On/Off. The door unlock relay output from the body control module (BCM), where the relay actuating to the unlock position is displayed as On.
- Battery Voltage Signal
-
The scan tool displays 9.0-15.0 volts. The state of the battery voltage supplied to the BCM.
- Calibration ID
-
The scan tool displays the calibration ID number of the BCM.
- Door Lock Relay
-
The scan tool displays On/Off. The door lock relay output from the BCM, where the relay actuating to the lock position is displayed as On.
- Door Lock Relay Fdbk.
-
The scan tool displays Active/Inactive. The door lock relay feedback input to the BCM, where the relay being actuated is displayed as Active.
- Driver Door Ajar Sw.
-
The scan tool displays Door Closed/Door Ajar. The driver door ajar switch input to the BCM, where a closed switch is displayed as Door Ajar.
- End Model Part Number
-
The scan tool displays the end model part number of the BCM.
- Julian Date of Build
-
The scan tool displays the date the BCM was built.
- Passenger Door Ajar Sw.
-
The scan tool displays Door Closed/Door Ajar. The passenger door ajar switch input to the BCM, where a closed switch is displayed as Door Ajar.
- Software Part Number
-
The scan tool displays the BCMs software revision part number.
- Year Module Build
-
The scan tool displays the year the BCM was built.