Transfer Case Motor/Encoder Replacement

Fig 1: Transfer Case Motor/Encoder Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
1	Encoder Motor Electrical Connector
2	Mounting Encoder Motor Bolt (Qty: 3) Tighten: 10 N.m (89 lb in)
3	Encoder Motor Mounting Bracket Bolt Tighten: 10 N.m (89 lb in)
4	Encoder Assembly Motor
5	Encoder Motor Bracket Nut Tighten: 5 N.m (44 lb in)
6	Encoder Motor Bracket