LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case - BW 4484 >> Repair Instructions >> Transfer Case Control Module Reprogramming >> Programming Using Scan Tool Pass-Through Connection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Using Scan Tool Pass-Through Connection

  1. Connect the scan tool to vehicle and power it up.
  2. Connect the computer station to the scan tool.
  3. Select "PC Using Scan Tool Connection" from the programming menu on the computer station.
  4. Follow the menu select items for reprogramming and provide information as to what type of device you are programming and whether you are reprogramming or replacing the electronic control unit (ECU).
  5. Select "vehicle" from the selection menu.
  6. Select the module you wish to program.
  7. Select "Normal" for Programming Type.
  8. Select the applicable software calibrations.
  9. Transfer data file to the scan tool.
scientia non olet · About LEMON Manuals