LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module (3) to the vehicle.
  2. Install the cruise control module (3) to the cruise control bracket (1).
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).

    Tighten 

    Tighten the nuts to 5 N.m (44 lb in).

  4. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement .
  5. Connect the electrical connector to the cruise control module.
  6. Install the air cleaner assembly to the vehicle.
    Fig 1: Installing Cruise Control Module
    G02422758Courtesy of GENERAL MOTORS CORP.
  7. Close the hood.