Keyless Entry Transmitter Battery: Service and Repair

Transmitter Battery Replacement

Removal Procedure

Under normal use, the battery in the transmitter will last about 2 years, form battery replacement, use a Panasonic 3 volt, type CR2032, or the equivalent.

1. In order to open the transmitter case, perform the following steps:

1. Insert a dime between the two halves of the transmitter near the key ring hole.




2. Twist the dime.




2. Remove the battery.

Installation Procedure




1. Install the battery with the (+) side down.
2. In order to close the transmitter case, perform the following steps:

1. Align the top and bottom covers.
2. Snap together the top and bottom covers.
3. Inspect the operation of the transmitter.