Setup for Component Replacement
WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, a crankshaft position (CKP) variation learn procedure must be performed:
- Engine replacement
- Any engine repair that disturbs the crankshaft position CKP sensor or its relationship with the crankshaft reluctor wheel
- CKP sensor
Refer to one of the following procedures:
- CKP System Variation Learn Procedure in Engine Controls - 2.8L (LK5)
- CKP System Variation Learn Procedure in Engine Controls - 3.5L (L52)