LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    IMPORTANT: The turn signal multifunction switch and Inflatable restraint steering wheel module coil are serviced as an assembly.
  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
    3. Fig 1: View Of Wire Harness Straps & Assembly
    GM1488252Courtesy of GENERAL MOTORS CORP.
  3. Disconnect any electrical connectors and remove the wiring harness from any retainers as needed.
    4. Fig 2: View Of Multifunction Switch/SIR Coil Assembly
    GM1488282Courtesy of GENERAL MOTORS CORP.
  4. Remove the turn signal multifunction switch bolts.
  5. Slide the multifunction turn signal switch off of the steering column.
scientia non olet · About LEMON Manuals