Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Body Control Module

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors.
Install the module to the bracket.

NOTE: Refer to Fastener Notice .

Install the screws that secure the module to the bracket.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the I/P compartment. Refer to Instrument Panel Compartment Replacement .
Reprogram the module. Refer to Control Module References .